KATO HD2045 Cylinder Seal Kit
- KATO HD2045 Cylinder Seal Kit (The picture is for reference only, everything is subject to the actual picture)
detailed parameters
Physical property Test standard Unit Value
Hardness ASTM D2240 shore A 96
Hardness ASTM D2240 shore D 51
Density ASTM D792 g/cm3 1.19
Tensile Strength ASTM D412(500mm/min) MPa 42
100% modulus ASTM D412 (500mm/min) MPa 14.5
300&modulus ASTM D412(500mm/min) MPa 26
Elongation at break ASTM D412(500mm/min) % 420
Tear Strength ASTM D264(500mm/min) N/mm 145
Abrasion DIN 53516 mm3 29
Compression set (70℃ 24H) ASTM D395 (method B compression rate 25%) % 21
Compression set (100℃ 24H) ASTM D395 (method B compression rate 25%) % 33
Low temperature retraction TR10 GB/T7758-2002 ℃ -24
Low temperature retraction TR30 GB/T 7758-2002 ℃ -15.7
Low temperature retraction TR50 GB/T 7758-2002 ℃ -9.8
Application Scenario
Seal kits are used to close gaps between components in hydraulic cylinders. Closing these gaps is essential because seals are responsible for maintaining hydraulic pressure and preventing contaminants in fluid power systems.
((The picture is for reference only, everything is subject to the actual picture))
Application:
Kato Excavator HD700G-2
detailed information
Application:
Kato Excavator HD700G-2
PROBLEM INFORMATION
- About BORISE
- Company Profile
- About team
- on service
- Company Chronology
- Join us
- technical support
- Industry Solutions
- Technical Support Analysis
Copyright © 2022，All right reserved © Borise Technology Co., Ltddesign by:weetop